设为首页 | 加入收藏

工业齿轮油系列

您所在的位置：首页  »  产品分类  »  福斯润滑油  »  工业齿轮油系列
RENOLIN UNISYN CKC 150详细说明
<< 返回上一页发布日期：2012-8-15 　　　　已有 人浏览

RENOLIN UNISYN CKC

Polyalphaolefin-Based Industrial Gear and Lubricating Oils

Designed for use in industrial gearboxes and general lubricating systems subject to high temperatures, RENOLIN UNISYN CKC oils are fully-synthetic lubricants based on polyalphaolefins. RENOLIN UNISYN CKC oils lower friction and reduce wear. Furthermore, these oils increase the efficiency of machine components. Depending on the application, a number of viscosity grades can be satisfied by a single RENOLIN UNISYN CKC oil. This allows users to rationalize stocks and cut costs. Polyalphaolefins, and thus RENOLIN UNISYN CKC oils, are miscible and compatible with mineral oils at all ratios and can be disposed-of as such. The compatibility of polyalphaolefins with common machinery materials, seals and paint finishes is comparable with that of mineral oils. Changing-over to RENOLIN UNISYN CKC is therefore very simple and requires no prior flushing. RENOLIN UNISYN CKC oils can be classified as CKC lubricating oils according to ISO 6743-6.

The specific benefits of using RENOLIN UNISYN CKC oils are:

  • Extremely good ageing resistance
  • Excellent corrosion protection
  • Good cold-flowing properties
  • Excellent viscosity-temperature behaviour
Application:

RENOLIN UNISYN CKC oils can be used in bearings, lubrication systems and gearboxes subject to high or fluctuating temperatures.
In gearboxes and lubricating systems where the sump temperatures exceed 90°C, normal mineral oil change intervals can be significantly extended with RENOLIN UNISYN CKC oils which, in turn, substantially lower operating and disposal costs.
When changing-over to RENOLIN UNISYN CKC oils in machines and equipment which operate at temperatures of over 60°C, one viscosity grade lower than the normal mineral oil grade should be selected.

RENOLIN UNISYN CKC 68100150220320460680 
Lubricating oil type          
acc. to ISO 6743-6 CKC 68 CKC 100CKC 150CKC 220CKC 320CKC 460CKC 680 
acc. to DIN 51 502 HC 68HC 100HC 150HC 220HC 320HC 460HC 680 
CharacteristicsUnit       Test method
Kinematic viscosity         
at 40 °Cmm2/s72104151221315479668ASTM D 445
at 100 °Cmm2/s11.114.919.425.833.34562ASTM D 445
Viscosity index 146149147148148149159ASTM D 2270
Density at 15 °Ckg/l0.8370.8420.8480.850.8510.8530.855ASTM D 1298
Flash point, Cleveland open cup°C248254230232234304262ASTM D 92
Pour point°C-51– 45– 45– 42– 39– 33– 33ASTM D 97
Neutralization numbermg KOH/g0.80.90.90.90.90.90.9ASTM D 974
Foaming,         
seq. Iml5/05/05/05/05/05/05/0ASTM D 892 seq. I III
seq. IIml15/015/015/015/015/015/015/0ASTM D 892 seq. I III
seq. IIIml5/05/05/05/05/05/05/0ASTM D 892 seq. I III
Copper corrosiondegree of corr.1a-100A241a-100A241a-100A241a-100A241a-100A241a-100A241a-100A24ASTM D 130
Rust prevention pass Bpass Bpass Bpass Bpass Bpass Bpass BASTM D 665
Four ball EP testN2200240024002400240024002400ASTM D 2783
FZG mechanical gear rig testload stage> 12> 12> 12> 12> 12> 12> 12DIN 51 354-2
< 返回工业齿轮油系列
【上一条】：RENOLIN CLP 68详细说明
【下一条】：RENOLIN UNISYN CKC详细说明